Complete with crane and hoist-specific software is the Magnetek Impulse G+Mini Inverter Drive. Designed to reduce the wear and tear of critical crane components such as brakes and gearboxes which is a breakdown situation can become very costly replacements. Installing inverter drives is the answer to the need for longer service life and a smoother electrical operation. Instead of ripping into maximum operation speed the Impulse G+Mini Inverter Drive gradually builds speed and utilizes the same principle to slow things down.
Installed in as little as five minutes by a suitably qualified electrician and easy to set up via a 7-step quick start. No computer or special software is required for installation.
Fitted with standard 24DC control signal interface.
Resistors & EMC Line Filters
Each unit should be fitted with an EMC filter to meet the EN standards. EMC filters ensure a cleaner supply of electricity to the Invertor Drive and take up no extra room in the control panel due to being foot mounted meaning they are housed between the drive and the control panel wall utilizing the same holes and footprint. This saves space and requires less drilling. Every system should also include a resistor, you can find these as optional extras within your order of a Magnetek inverter drive from LES. Braking Resistors ensure the energy produced from slowing down or lowering a hoist via the brake is then fed back into the DC bus of the drive can be burned off. Choose between a resistor suitable for your drive's application from across the travel and long driver application to hoisting applications (indoor or outdoor). The outdoor resistor commands a higher price as this is naturally of a higher duty to meet the demands of the environment.
Available with interface cards to enable a change in control voltage to standard crane AC control voltages. This reduces time and cost as there is no need for additional external relays to switch the voltage from 24v DC for the drive to an AC voltage that the crane runs on.